| Input Frequency Range (Low) | 23.70 – 25.20 GHz |
|---|---|
| Input Frequency Range (High) | 25.20 – 26.70 GHz |
| Output Frequency Range | 950 – 2450 MHz |
| Band Selection | +15V/0V |
| Output Power @ 1dB GCP | +7 dBm min, + 10dBm Typical |
| Small Signal Gain | 35 dB min |
| Gain Flatness | 0.5dB max over any 50MHz |
| Output Level Control | -10dB Manual switch |
| Noise Figure | 4.0 dB max |
| Output Harmonics @Pout = 0 dBm | -40 dBc max |
| Output Spurious @Pout = 0 dBm | -60 dBc max |
| LO Leakage | -60 dBm max |
| Additive Phase Jitter (100Hz – 10MHz) | 0.4° RMS max |
| LO Frequency Stability | ±0.5 ppm max |
| Input VSWR | 2:1 max |
| Output VSWR | 2:1 max |
| DC Input | 15VDC @ 1A max |
| RF Input Connector | WR34 (grooved) |
| RF Output Connector | SMA Female |
| Band Select/DC Connector | Solder Pin |
| Operating Temperature | -30°C to +50°C (Option 1) -40°C to +60°C (Option 2) |
| Enclosure Rating | IP-65 |
| Dimensions | 5.5” x 6” x 1.9” |
The transmitter provides a frequency translation of an L-band input to a Ka-band output. It features high linearity, low phase noise performance and high linear power.
Come and visit us at AFCEA West 2010, Canadian Pavilion, Booth # 903 at San Diego Convention Center, February 2-4, 2010.