Product
 

Ku-Band Airborne Transceiver Subsystem

Model: TR-14A014A5-4348


???

This airborne RF subsystem provides the transmission and receive path to an aircraft for bi-directional connectivity and multi-cast services. The subsystem consists of a Block Down Converter and a High Power Block Up Converter.

GENERAL

Block Down Converter Characteristics:

Input Frequency Range10.7 to 12.75 GHz
Input Connector50 Ohm SMA Female
Input Return Loss14 dB Minimum
Input Signal Levelup to -35 dBm
Output Frequency Range950 to 2,150 MHz
Output Connector50 Ohm SMA Female
Output Frequency AccuracySame as the 10 MHz external reference input
Output Return Loss14 dB Minimum
Output 1 dB Compression Point10 dBm
Center Frequency Gain35 dB ± 3 dB
Gain Flatness over any 36 MHz Band±0.5 dB Maximum
Gain Flatness over the Full Band±1.5 dB Maximum
Gain Variation over the Operational Temperature Range±1.5 dB Maximum
Noise Figure6 dB Maximum
Image Rejection40 dB Minimum
Group Delay variation over the full band±1.5 ns ptp Max.
Output In-Band Spurious-60 dBc Max.
Output Out-Of-Band Spurious-50 dBc Max.
Output Harmonics-25 dBc Max.
Output SSB Phase Noise-40 dBc/Hz @ 10 Hz
-70 dBc/Hz @ 100 Hz
-80 dBc/Hz @ 1 kHz
-90 dBc/Hz @ 10 kHz
-100 dBc/Hz @ 100 kHz
-110 dBc/Hz @ 1 MHz
-118 dBc/Hz @ 10 MHz
10 kHz to 10 MHz Integrated Phase Noise1.90° RMS Max.

Subsystem:

Dimension16” by 12” by 2.5”
Weight18 lbs Maximum

High Power Block Up Converter Characteristics:

Input Frequency Range950 MHz to 1450 MHz
Input Connector50 Ohm N-type Female
Input Return Loss14 dB Minimum
Input Power Range-35 dBm to -5 dBm
Output Frequency Range14.0 GHz to 14.5 GHz
Output Connector50 Ohm N-type Female
Output Frequency AccuracySame as the 10 MHz external reference input
RF Output Power43 dBm min, 46 dBm max
Gain, Constant Setting48 ± 1 dB
Gain Stability over a 24 hour period @ constant temperature±0.25 dB Maximum
Gain Variation over the Operational Temperature Range±0.75 dB Maximum
Gain Flatness over the Full Band±0.75 dB Maximum
Image Rejection80 dB Minimum
Group Delay variation over the full band±1.5 ns ptp Max.
Intermodulation products when transmitting two unmodulated carriers, 10 MHz spacing, at a total power level of 40 dBm: 3rd Order-26 dB Max.
5th Order: -28 dB Max.
7th Order: -33 dB Max.
Spectral Regrowth while transmitting an OQPSK modulatedcarrier with a roll-off factor of 0.35 and a symbol rate of 32.4 Msps at 43 dBm output power-15.7 dBc max. @ 42.8 MHz offset
-50 dBc max. @ 97.2 MHz offset
Spurious Emissions within the frequency range of 14.0 GHz to 14.5 GHz-60 dBc Maximum
Spurious and Harmonic Emissions outside the frequency range of 14.0 GHz to 14.5 GHz-50 dBc Maximum
Noise Emission into 10.70 GHz to 12.75 GHz Receive Band-60 dBm/MHz Max.
Output SSB Phase Noise-70 dBc/Hz @ 100 Hz
-80 dBc/Hz @ 1 kHz
-90 dBc/Hz @ 10 kHz
-100 dBc/Hz @ 100 kHz
-110 dBc/Hz @ 1 MHz
-118 dBc/Hz @ 10 MHz
1 kHz to 128 kHz Integrated Phase Noise2.41° RMS Max.
Output Mute Level80 dB Minimum

Interface:

AC Input115V, 47 – 880 Hz
3.0 A Maximum
Monitor Indication & ControlMute / unmute
LO Lock Status
Fans Status
Over Temperature Alarm

Environmental:

Operational Temperature Range0 to +55 °C
Non-operational Temperature Range-50 to +70 °C
Operational HumidityUp to 100% Condensing

50W Ka-Band SSPA BUC for SATCOM Application

The transmitter provides a frequency translation of an L-band input to a Ka-band output. It features high linearity, low phase noise performance and high linear power.

AFCEA International

Come and visit us at AFCEA West 2010, Canadian Pavilion, Booth # 903 at San Diego Convention Center, February 2-4, 2010.